RaspiOS Bullseye and waveshare install..which driver are you using now?Touchscreen now working... Calibrate touchscreen after connectingNote 2 wires to PI pins 23 and 19Code:
LCD---PI PIN (NOT GPIO NUMBER)LED------17(3.3v)SCK------23^SDI------19*D/C------15RESET----13CS-------24GND------6 (gnd)VCC------1 (3.3v)SDO(MISO) N/CT_CLK----23^T_CS-----26T_DN-----19*T_OUT----21T_IRQ----11
git clone https://github.com/waveshare/LCD-show.git
cd LCD-show/
sudo ./LCD28-show
Statistics: Posted by gordon77 — Sun May 05, 2024 9:23 am